My Old Fashioned Pop Corn Machine Doesn't Heat Up
Popcorn Popper Repair
This Fix-Information technology Guide on popcorn popper repair tells how a popcorn popper works, what oftentimes goes wrong, how to place a popcorn popper problem, and what parts and tools you will demand to fix it. It so gives unproblematic footstep-by-step instructions for how to disassemble a hot air popper and an oil popper. This Gear up-It Guide also refers to electric receptacle repair, electric cord repair, heating element repair, appliance controls repair, and motor repair for specific issues.
How Does a Popcorn Popper Piece of work?
An electrical popcorn popper is a motorized heating appliance.
A popcorn popper is a small electrical appliance designed for heating kernels of popcorn to the point where they pop into an edible form. Corn poppers come in two basic types, hot-air poppers and oil poppers. Hot-air poppers accept a fan-like impeller that agitates the kernels with a turbulent stream of hot air in the popping chamber. Oil poppers utilise a rotating rod to stir the kernels in a pocket-sized amount of heated cooking oil. The heat in both styles of popper is generated by a heating chemical element in the base, activated past a simple on-off switch and controlled past a thermostat. Both types include a motor. The heating element tin be either a horseshoe-shaped solid rod or a springlike resistance coil.
What Can Go Wrong with a Popcorn Popper?
A faulty thermostat or thermal cutting-off is often the cause of common popcorn popper bug such every bit scorched or unpopped corn and excessive popping fourth dimension. Motors and other components can be replaced, but information technology may be as economic to replace the unabridged unit. As with other minor heating appliances, the electrical cord, the switch, the thermal cutoff, and the heating element or coil all could exist faulty.
Fix-Information technology Tip
Oil poppers can easily get dirty considering excess oil splatters and cooks on to metal components. After every utilise, clean the popper with a sponge dampened in soapy water; and so rinse with clear h2o. Don't immerse the unit in water unless the manufacturer says it'due south safe to do and so.
How Can I Identify a Popcorn Popper Problem?
- If the unit does not work at all, make sure power is on at the electrical receptacle and test the electrical cord, replacing it if necessary. Likewise test the switch and the thermal cutoff (run into the Apparatus Controls Fix-It Guide), replacing them equally needed.
- If the unit doesn't heat, test the heating chemical element (oil popper) or inspect (gasbag popper) the chemical element. If the chemical element is faulty, supersede the popcorn popper.
- If an oil popper's stir rod doesn't stir, examination the motor and replace it if it is faulty or supersede the popper.
- If a hot-air popcorn popper's fan doesn't work, disassemble the popper and clean any droppings blocking the impeller.
Fix-It Tip
Y'all tin can refresh an oil popper's nonstick surfaces past rubbing them periodically with a teaspoon of vegetable oil.
What Exercise I Need for Popcorn Popper Repair?
Replacement parts for popcorn poppers typically are bachelor just from the manufacturer. Check the owner's manual for parts numbers and parts ordering instructions. Brand sure the cost of replacement parts (don't forget to include any aircraft and handling charges) doesn't exceed the cost of replacing the unit. To disassemble and test an oil or gasbag popper you'll need the following tools:
- Screwdrivers
- Wrenches
- Multimeter
What Are the Steps to Popcorn Popper Repair?
Remove the base cover to access the motor.
Detach a gasbag popcorn popper:
- Unplug the popper and plow it upside down.
- Remove the screws holding the chute to the base and remove the chute.
- Remove the screws or fittings to loosen the motor.
- Remove screws holding the motor base and impeller housing. Separate the base and housing to expose the heating gyre and circuitry.
- Use a multimeter to test the motor, heating element, and appliance controls, replacing as needed.
A gasbag popcorn popper consists of a chute, heating element, and fan motor. The element and fan can exist tested with a multimeter.
Disassemble an oil popcorn popper:
- Unplug the popper and turn information technology upside downward.
- Remove any screws securing the access plate. All serviceable components are beneath the plate.
- Use a multimeter to exam the motor, heating element, and appliance controls, replacing as needed.
0 Response to "My Old Fashioned Pop Corn Machine Doesn't Heat Up"
Post a Comment